EDK10.1 and emaclite

[John Linn]

Hi Georg,

I don't really know much about the state of the emac lite driver in the
Git tree. I inherited the Git tree with some stuff already in it.

I test the LL TEMAC driver, but haven't had the bandwidth and priority
to do any emac lite testing.

Thanks,
John

> -----Original Message-----
> From: linuxppc-embedded-bounces+john.linn=xilinx.com at ozlabs.org
[mailto:linuxppc-embedded-
> bounces+john.linn=xilinx.com at ozlabs.org] On Behalf Of Georg Schardt
> Sent: Monday, September 08, 2008 10:30 AM
> To: linuxppc-embedded at ozlabs.org
> Subject: EDK10.1 and emaclite
> 
> Hi all,
> 
> im trying to use the emaclite core which comes with the EDK10.1 with
the
> 2.6.26 kernel from git.xilinx.com on virtex4fx12 minimodul. the emac
is
> detect by the kernel:
> 
> xilinx_emaclite xilinx_emaclite.0: MAC address is now  2: 0: 0: 0: 0:
0
> xilinx_emaclite xilinx_emaclite.0: using fifo mode.
> xilinx_emaclite xilinx_emaclite.0: Xilinx EMACLite at 0x81000000
mapped
> to 0xC5060000, irq=0
> 
> i can change the mac-address with ifconfig and i can give an
ip-address
> to the device,
> but a ping is not possible and arp is not working. i think that the
phy
> is not working right.
> 
> has someone others the same problem ? what can i changed ? i have
tried
> out all possible phy driver in the linux  kernel
> 
> a setup with the lltemac is working fine, but i want to use the
emaclite
> 
> thanks
> regards
> georg
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.