No output from SMC1 console with the 2.6.26 kernel (PQ2FADS based board)

[Scott Wood]

Matvejchikov Ilya wrote:
> 		cpm at 119c0 {
> 			#address-cells = <1>;
> 			#size-cells = <1>;
> 			#interrupt-cells = <2>;
> 			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";

Add "simple-bus" to this compatible list.

Other than that, and that you should be using dts-v1, the tree looks 
fine.  If adding "simple-bus" doesn't fix it, check your pin setup; 
pq2fads doesn't have an SMC serial port, so its platform file doesn't 
set up those pins.

-Scott