Linker error: no init_fcc_ioports

[Scott Wood]

On Fri, Feb 15, 2008 at 06:05:36PM -0800, Bizhan Gholikhamseh (bgholikh) wrote:
> Hi
> Our platform is based on mpc8541cds, I am using Linux 2.6.24 from
> powerpc git tree.
> I tried to compile the kernel to include the fcc Ethernet controller and
> I got the following
> linker  errors:
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
>  
> arch/powerpc/sysdev/built-in.o: In function `fs_enet_of_init':
> arch/powerpc/sysdev/fsl_soc.c:853: undefined reference to
> `init_fcc_ioports'
> arch/powerpc/sysdev/fsl_soc.c:853: undefined reference to
> `init_fcc_ioports'

You need to select PPC_CPM_NEW_BINDING from your board's kconfig entry
(and make sure you comply with the new CPM bindings, and that all pins
are set up by firmware or platform code).

-Scott