Help with DTS file on MPC8313e-rdb board

Scott Wood scottwood at
Thu Dec 4 04:43:35 EST 2008

Joe Shmo wrote:
> What I don't know is what reg = <4> means.  Is that
> the phy address or the interrupt? 

It's the PHY address.

> My phy is the National semi dp83848.  It does not use
> an IRQ.  Should I replace this with zero?  Should I
> take that line out of the DTS file?

You should remove the interrupts and interrupt-parent properties.


More information about the Linuxppc-embedded mailing list