Which 2.6 kernel for MPC5200

Jon Smirl jonsmirl at gmail.com
Tue Sep 11 09:22:39 EST 2007


On 9/10/07, Grant Likely <grant.likely at secretlab.ca> wrote:
> On 9/10/07, Babarovic Ivica <ivica.babarovic at asist.si> wrote:
> > Hi!
> >
> > What kernel should I get/pull for MPC5200 clone board.
> > I've been away from coding on mpc5200 for quite some time now.
> > I've read some archives from ML.
> > Git repo on Sylvain Munauts url:
> > http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx.gitpage
> > isn't working. Nothing on http://*git*.secretlab.ca/cgi-bin/*gitweb*.cgi
> > <http://git.secretlab.ca/cgi-bin/gitweb.cgi> to.
> >
> > I've pulled the sources from kernel.org git server.
> > git clone
> > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> > linux-2.6-mpc52xx
>
> My 52xx git tree became way out of date, so I dropped it from the
> server.  Best bet is to use mainline which gives your everything
> except the drivers that use the bestcomm DMA engine (like Ethernet).
>
> Then you need to apply the bestcomm patches.  You can get them here:
>
> http://www.246tnt.com/mpc52xx/dev_full/

I just finished rebasing the Efika version of those patches to current mainline.

I'm working on merging support for my Phytec pcm030 into them.
After I get stable the plan is to switch over to Domon's new FEC driver.


>
> Have fun,
> g.
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
> grant.likely at secretlab.ca
> (403) 399-0195
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>


-- 
Jon Smirl
jonsmirl at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mpc.tgz
Type: application/x-gzip
Size: 45497 bytes
Desc: not available
Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070910/fb1cf70f/attachment-0001.bin 


More information about the Linuxppc-embedded mailing list