Thanks and new problems

[Clemens Koller]

schardt schrieb:
> First, many many thanks to Grant. My VirtexII Demo Board ist running a
> 2.6. Linux :))
> 
> But now, i switched to a Virtex4-Board with Ethernet (Mini Module from
> Avnet)
> This will i used in my application, if i can handle it. :)
> 
> Linux is up and running, the ethernet is detected as eth0, link led is on
> but, and thats the problem, speed negotiating das not work.

Check the PHY configuration (i.e. the bootstrap pins on the PHY).

And - if appropriate - read out the PHY configuration (MDIO) and see
if it's correct.

Regards,
-- 
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com