Virtex TEMAC 1000Mb/s trouble, but 100b/s is working

[g.schardt at fz-juelich.de]

can you tell me, how to add this parameters to the kernel boot parameter ? or do you mount after booting ?

G



----- Original Message -----
From: alex_snippet <alex.snippet at gmail.com>
Date: Wednesday, November 14, 2007 4:44 pm
Subject: Re: Virtex TEMAC 1000Mb/s trouble, but 100b/s is working

> 
> Hi All
> 
> Thanks a lot
> 
> Trouble solved by adding tcp,no_lock !!!
> 
> Regards, Alex
> -- 
> View this message in context: http://www.nabble.com/Virtex-TEMAC-
> 1000Mb-s-trouble%2C-but-100b-s-is-working-tf4803823.html#a13749163
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 
> 



-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich

Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDirig'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. 
Vorsitzender)
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------