mpc5200 and spi bus

[Asier Llano Palacios]

Thank you very much for the patch. I will tell you how it worked.
Currently I need the SPI mode PSC driver (this one), but the other one
may be quite interesting also.

Thank you,
Asier

El mié, 02-05-2007 a las 14:19 -0600, John Rigby escribió:
> This will take you to a page where the download attachment link will
> actually work:
> 
> http://sourceforge.net/mailarchive/attachment.php?list_name=spi-devel-general&message_id=45DEDC70.7010301@toptica.com&counter=1
> 
> On 5/2/07, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > Hi,
> >
> > On Wed, May 02, 2007 at 10:02:44AM +0200, Asier Llano Palacios wrote:
> > > >
> > >
> > > I'll have a look. If don't see anything the code from 2.4.x is good
> > > starting point to port it.
> >
> > There was a patch for the PSC in SPI mode for 2.6 posted here:
> >
> > http://sourceforge.net/mailarchive/forum.php?thread_name=45DD9ABF.9010009%40toptica.com&forum_name=spi-devel-general
> >
> > I can forward you the patch if you like, because the sourceforge server
> > only replies with "Insufficient parameters" when I click on the patch
> > link :(
> >
> > I myself wrote a driver for the dedicated SPI port which I can post on
> > spi-devel-general tomorrow (after I looked over it again).
> >
> > Best regards,
> >   Sascha
> >
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded at ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> > 
 
----------------------------------------- PLEASE NOTE -------------------------------------------
This message, along with any attachments, may be confidential or legally privileged. 
It is intended only for the named person(s), who is/are the only authorized recipients.
If this message has reached you in error, kindly destroy it without review and notify the sender immediately.
Thank you for your help.
µSysCom uses virus scanning software but excludes any liability for viruses contained in any attachment.
 
------------------------------------ ROGAMOS LEA ESTE TEXTO -------------------------------
Este mensaje y sus anexos pueden contener información confidencial y/o con derecho legal. 
Está dirigido únicamente a la/s persona/s o entidad/es reseñadas como único destinatario autorizado.
Si este mensaje le hubiera llegado por error, por favor elimínelo sin revisarlo ni reenviarlo y notifíquelo inmediatamente al remitente. Gracias por su colaboración.  
µSysCom utiliza software antivirus, pero no se hace responsable de los virus contenidos en los ficheros anexos.