mpc5200 and spi bus

[John Rigby]

This will take you to a page where the download attachment link will
actually work:

http://sourceforge.net/mailarchive/attachment.php?list_name=spi-devel-general&message_id=45DEDC70.7010301@toptica.com&counter=1

On 5/2/07, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> Hi,
>
> On Wed, May 02, 2007 at 10:02:44AM +0200, Asier Llano Palacios wrote:
> > >
> >
> > I'll have a look. If don't see anything the code from 2.4.x is good
> > starting point to port it.
>
> There was a patch for the PSC in SPI mode for 2.6 posted here:
>
> http://sourceforge.net/mailarchive/forum.php?thread_name=45DD9ABF.9010009%40toptica.com&forum_name=spi-devel-general
>
> I can forward you the patch if you like, because the sourceforge server
> only replies with "Insufficient parameters" when I click on the patch
> link :(
>
> I myself wrote a driver for the dedicated SPI port which I can post on
> spi-devel-general tomorrow (after I looked over it again).
>
> Best regards,
>   Sascha
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>