u-boot+linux for ML403 board.

[Leonid]

Hi:

Does anybody use u-boot+linux on ML403 board? If yes, can somebody give
me kernel or kernel patch to any open source kernel tree (DENX or
kernel.org).

I couldn't prepare uImage which is working with u-boot on ML403 board -
it hangs forever:

TFTP from server 192.168.0.141; our IP address is 192.168.0.203
Filename 'LM200/rel/1.0.1d-403/uImage'.
Load address: 0x400000
Loading: T
#################################################################
 
#################################################################
         #######################################
done
Bytes transferred = 861911 (d26d7 hex)
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.19.2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    861847 Bytes = 841.6 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Current stack ends at 0x03E676F0 => set upper limit to 0x00800000
Board Info pointer (kbd) at 007ffe80 ## cmdline at 0x007FFF00 ...
0x007FFFF8
memstart    = 0x00000000
memsize     = 0x04000000
flashstart  = 0x28000000
flashsize   = 0x00800000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
bootflags   = 0x00000000
procfreq    =    300 MHz
plb_busfreq =    100 MHz
ethaddr     = 00:01:02:CB:CB:71
IP addr     = 192.168.0.203
baudrate    = 115200 bps
No initrd
## Transferring control to Linux (at address 00000000) ..

Thanks,

Leonid.