Interrupts on xilinx ml403

[Mirek23]

I will try to go further with that after trying Grant's suggestion. When I
still have a problem I will contact you.

Best Regards

Mirek

Misbah khan wrote:
> 
> hi ..
> 
> If you could send me the code and the config related doc . I could then be
> able to suggest you something. As per the understanding of the problem i
> guess you are not congiguring the interrupt controller properly. you have
> to use correct IRQ no for  that ports then other configuration such as
> interrupt type, and whenever you service the interrupt you have to clear
> the interrupt etc are to be taken care ....Please see the interrupt
> controller register and do your settings correctly . If the same persists
> then you please send me the code and the documents then only i could give
> the exact explaination on this 
> 
> ----misbah
> 
> Mirek23 wrote:
>> 
>> Dear All,
>> 
>>       I use linux kernel 2.6 on ppc405 of my Avnet (xilinx like ml403)
>> evaluation board.
>> 
>> I have setup the virtex-4 FPGA to deal with Themac and Serial interfaces.
>> As input/output devices I have chosen 8 LEDs and DIP Switches.
>> 
>> With such a configuration I am able to control from Linux user
>> applications via GPIO driver the LEDs and DIP Switches.
>> 
>> Right now I just wanted to make use of the interrupts. I have configured
>> the Dip switches to use interrupt. The interrupt accoures when the DIP
>> Switches state has changed.
>> 
>> In the BSP generated by EDK 9.1 I see that macro :   
>> 
>> #define XPAR_DIP_SWITCHES_8BIT_INTERRUPT_PRESENT 1
>> 
>> has changed from zero to one.
>> The macro XPAR_INTC_MAX_NUM_INTR_INPUTS is set to 1 as it was before.
>> This is due to the fact that 
>> TEMAC uses one interrupt line.
>> 
>> Does it mean that DIP Switches do not use INTC interrupt controller?
>> How to handle the DIP Switches interrupt?
>> Does the Interrupt handler routine have to acknowledge the interrupt from
>> Dip Switches?
>> 
>> Many thanks in advance for any hint on that.
>> 
>> Best Regards
>> 
>> Mirek
>> 
>> 
>> 
>> 
>>  
>> 
> 
> 

-- 
View this message in context: http://www.nabble.com/Interrupts-on-xilinx-ml403-tf4117226.html#a11765540
Sent from the linuxppc-embedded mailing list archive at Nabble.com.