Interrupts on xilinx ml403

[Mirek23]

Hi Grant,

   Thanks for the suggestion. I will fix that and see what the EDK will
generate.

Best Regards

Mirek



Grant Likely-2 wrote:
> 
> On 7/20/07, Mirek23 <miroslaw.dach at psi.ch> wrote:
>> Does it mean that DIP Switches do not use INTC interrupt controller?
>> How to handle the DIP Switches interrupt?
>> Does the Interrupt handler routine have to acknowledge the interrupt from
>> Dip Switches?
> 
> It probably means that the GPIO irq out line is not hooked up to your
> INTC in the system.mhs file.
> 
> g.
> 
> -- 
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
> grant.likely at secretlab.ca
> (403) 399-0195
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 
> 

-- 
View this message in context: http://www.nabble.com/Interrupts-on-xilinx-ml403-tf4117226.html#a11765478
Sent from the linuxppc-embedded mailing list archive at Nabble.com.