about FCC of MPC8270

[li.chunlin at zte.com.cn]

hello, every one

   I have a board with mpc8270. And there are two ethernet interface by 
fcc1 and fcc2. Now in linux kernel 2.6.14 fcc1 is ok, but fcc2 is some 
wrong. I set loopback of fcc2 or rmii. that's ok. But i set loopback in 
phy, it is wrong. But fcc2 is ok in u-boot.

I take a look with oscillograph. i find that there is signal from fcc2 to 
phy and there is signal from phy to fcc2 in data pins. But fcc2 cannot 
receive data and fcc2 can send data.

who know the reason? Can you tell me? 

thanks.
lichunlin


--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others.
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender.
This message has been scanned for viruses and Spam by ZTE Anti-Spam system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070704/3111e6a3/attachment.htm