ML403 Hard TEMAC, PLB and Linux 2.6

[Rick Moleres]

Hi,

As Ming says the Linux 2.6 TEMAC driver is made available in EDK 8.2.2 as part of the BSP and Libraries generation for Linux 2.6.  Note that we made a recent fix for better PHY address detection and speed negotiation. I've attached the adapter here, and it will be available in EDK 9.1.1 when that's released.

Thanks,
Rick

-----Original Message-----
From: linuxppc-embedded-bounces+moleres=xilinx.com at ozlabs.org [mailto:linuxppc-embedded-bounces+moleres=xilinx.com at ozlabs.org] On Behalf Of Ming Liu
Sent: Thursday, February 08, 2007 2:31 AM
To: mamsadegh at hotmail.com
Cc: linuxppc-embedded at ozlabs.org
Subject: RE: ML403 Hard TEMAC, PLB and Linux 2.6

Hi,
In xapp902, they are using the old cores for Temac. So it will be easier to 
generate a project in EDK 8.2. Not only the cores there are new, but also 
it can generate the driver for linux 2.6.

BR
Ming

>From: Mohammad Sadegh Sadri <mamsadegh at hotmail.com>
>To: <christophe.alayrac at cresitt.com>
>CC: linuxppc-embedded at ozlabs.org
>Subject: RE: ML403 Hard TEMAC, PLB and Linux 2.6
>Date: Thu, 8 Feb 2007 07:13:47 +0000
>
>
>Hi
>Thanks for reply
>Well, regarding xapp902, there is a very simple question, Where can I find 
it? It seems that Xilinx has deleted all of the links to these files.
>
>
>
>
>
>----------------------------------------
> > Subject: Re: ML403 Hard TEMAC, PLB and Linux 2.6
> > From: christophe.alayrac at cresitt.com
> > To: mamsadegh at hotmail.com
> > CC: linuxppc-embedded at ozlabs.org
> > Date: Thu, 8 Feb 2007 06:51:45 +0100
> >
> > Le mercredi 07 février 2007 ?22:30 +0000, Mohammad Sadegh Sadri a
> > écrit :
> > Hi Mohammad,
> >
> > Please find here after some answer
> >
> > > 1- I want to use, ML403, Hard TEMAC and PLB TEMAC cores. Is there any 
ready to use design, or any reference design available for this?
> > > I'm using EDK 8.1 and I understood that, when I choose the ML403 
board , EDK does not use hard temac, so , should I add it manually? ( well 
this is funny, but the wizard does not use hard temac , is it true? )
> > > Is there any ready EDK projects for ML403, with TEMAC and PLB TEMAC 
modules already inserted and cofigured? (I don't want to use GSRD ) ( If 
yes would you please put the link here )
> > >
> > You can start from XAPP 902 from Xilinx, this design demonstrate TEMAC
> > use in loopback mode. Some memers from that community have tried from
> > that design as a starting point. I did not nknow if the succeed.
> > I would recommand to get EDK 8.2 SP2 and use the Wizard to build a new
> > design with TEMAC.
> >
> > > 2- Simply, Is there any driver available for linux 2.6 , for PLB 
TEMAC and Hard TEMAC modules? If yes , can you put the link here, so that I 
can download it?
> > >
> > For the kernel you can get it from Montavista source code site using 
GIT
> > to download it (linux-xilinx-26). This is 2.6.17.4 version (last week!)
> >
> > Then you will need to pacth the Kernel with TEMAC drivers (look for
> > TEMAC PAULUS MVISTA with google, or follow my messages in that mailing
> > list)
> > NOTE: If you use that TEMAC patch do not use SGDMA on your TEMAC, use
> > FIFO.
> >
> > > thanks
> > Regards
> >
> > Chris
> > > _________________________________________________________________
> > > Personalize your Live.com homepage with the news, weather, and photos 
you care about.
> > > http://www.live.com/getstarted.aspx?icid=T001MSN30A0701
> > > _______________________________________________
> > > Linuxppc-embedded mailing list
> > > Linuxppc-embedded at ozlabs.org
> > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
>
>_________________________________________________________________
>Live Search: New search found
>http://get.live.com/search/overview
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded at ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded

_________________________________________________________________
ÓëÁª»úµÄÅóÓѽøÐн»Á÷£¬ÇëʹÓà MSN Messenger:  http://messenger.msn.com/cn  

-------------- next part --------------
A non-text attachment was scrubbed...
Name: adapter.tar.gz
Type: application/x-gzip
Size: 24141 bytes
Desc: adapter.tar.gz
Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070208/0a2d8c79/attachment.bin