Kernel Blocked

[David H. Lynch Jr.]

    I have a Xilinx ppc405 working out of the 2.6.18-rc7 linux-2.6 git 
tree - with patches for my board.
   
    I beleive you are either just at the end of the code in 
arch/ppc/boot/simple - which is mostly the initial load/decompress.
    Or just started the code in arch/ppc/kernel/head_4xx.S

    You ought to be able to grep "Now booting" to establish a last know 
good point.
    There is also a pretty good call tree in comments of 
arch/ppc/platforms/4xx/xilinx_ml403.c.
    While small parts are ml403 specific, much of it is generic.
    However, if you have not gotten into arch/ppc/kernel/head_4xx.S then 
you are not at the begining yet.
   


wei.li4 at elf.mcgill.ca wrote:
> Hi All,
>
> First, if anyone wants to use linux 2.6.18-rc2-g73a589b5 with ppc, he 
> should patch inflate.c from linux 2.6.18-rc7 to fix Uncompressing 
> failure problem. But new problem is: when relocate and gunzip functions 
> are finished, and 'Now booting the kernel' is shown, the system is 
> halted. My bootloader is working fine with linux 2.6.13, could anyone 
> tell me what the next function executes and how to check this kind of 
> problem, thanks.
>
> Wei
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>   


-- 
Dave Lynch 					  	    DLA Systems
Software Development:  				         Embedded Linux
717.627.3770 	       dhlii at dlasys.net 	  http://www.dlasys.net
fax: 1.253.369.9244 			           Cell: 1.717.587.7774
Over 25 years' experience in platforms, languages, and technologies too numerous to list.

"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein