Unable to build ELDK 4.0
Mathews, Phil
Phil.Mathews at innocon.com
Fri Sep 1 02:13:11 EST 2006
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Thu 8/31/2006 11:58 AM
To: Mathews, Phil
Cc: Linuxppc-embedded at ozlabs.org
Subject: Re: Unable to build ELDK 4.0
Dear Phil,
in message <3E8081396F6B524BA2854E7FA3F16438042EB1DB at mail.innocon.com> you wrote:
>
> I am attempting to build the ELDK kernel using the directions in
> /home/mathews/ELDK/ppc_6xx/usr/src/linux-2.6.15/README. The makefile is
Please also RTFM: http://www.denx.de/wiki/DULG/Manual?stickboard=yosemite ,
especially section "6.2. Kernel Configuration and Compilation":
http://www.denx.de/wiki/view/DULG/LinuxConfiguration#Section_6.2.
Note that I selected the DULG-version for a board for which 2.6
kernel support is available.
> trying to execute powerPC code (fixdep) on my Pentium box. Where can I
> get a X86 version of this program?
This is a consequence of wrong make commands.
> ##### Make attempt:
> mathews at mathews:~/ELDK/ppc_6xx/usr/src/linux-2.6.15> make
> O=/home/name/build/kernel menuconfig
You must pass correct ARCH= and CROSS_COMPILE= arguments when running
make, i. e.
make ARCH=ppc CROSS_COMPILE=ppc_6xx- ... menuconfig
etc. Also make sure to start from a clean source tree, i. e. run
"make mrproper" to clean up before configuring your board.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A modem is a baudy house.
====================
------Follow Up-----
====================
After doing "make mrproper" and again following the README file that came with ELDK:
env | grep -e ARCH -e COMPILE
ARCH=ppc
CROSS_COMPILE=ppc_6xx-
mathews at mathews:~/ELDK/ppc_6xx/usr/src/linux-2.6.15> make O=/home/name/build/kernel menuconfig
HOSTCC scripts/basic/fixdep
In file included from /home/mathews/ELDK/usr/../ppc_6xx/usr/include/sys/socket.h:35,
from /home/mathews/ELDK/usr/../ppc_6xx/usr/include/netinet/in.h:24,
from /home/mathews/ELDK/usr/../ppc_6xx/usr/include/arpa/inet.h:23,
from /home/mathews/ELDK/ppc_6xx/usr/src/linux-2.6.15/scripts/basic/fixdep.c:115:
/home/mathews/ELDK/usr/../ppc_6xx/usr/include/bits/socket.h:304:24: error: asm/socket.h: No such file or directory
make[2]: *** [scripts/basic/fixdep] Error 1
make[1]: *** [scripts_basic] Error 2
make: *** [menuconfig] Error 2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060831/c0a7ea0d/attachment.htm
More information about the Linuxppc-embedded
mailing list