question about linux with Xilinx ML-403

[Ming Liu]

Dear Rick,
Yes. I have downloaded the linuxppc-2.4 kernel. There is really the temac 
support. Thanks a lot for your information. 

Also. MontaVista will release the pro 4.0 based on 2.6 in the end of this 
month. I think in this version, Temac will be included. Temac will be more 
popularly supported in the following versions, I think. 

Regards
Ming


>From: "Rick Moleres" <rick.moleres at xilinx.com>
>To: "Ming Liu" <eemingliu at hotmail.com>,   "rick.moleres" 
<rick.moleres at xilinx.com>
>CC: <linuxppc-embedded at ozlabs.org>
>Subject: RE: question about linux with Xilinx ML-403
>Date: Wed, 24 May 2006 12:52:02 -0600
>
>
>Ming,
>
>Another option for you may be to get MontaVista's latest linuxppc-2.4 
kernel tree from source.mvista.com (using rsync), which I believe has the 
xilinx_gige directory and menuconfig entries.
>
>-Rick
>
>-----Original Message-----
>From: Ming Liu [mailto:eemingliu at hotmail.com]
>Sent: Wednesday, May 24, 2006 12:36 PM
>To: rick.moleres
>Cc: linuxppc-embedded at ozlabs.org
>Subject: RE: question about linux with Xilinx ML-403
>
>Dear Rick,
>OK. I will try that. However I cannot promise to finish this very soon
>because I am a novice. :) I will let you know if there is any result.
>
>Thanks for your method.
>
>BR
>Ming
>
>
> >From: "Rick Moleres" <rick.moleres at xilinx.com>
> >To: "Ming Liu" <eemingliu at hotmail.com>,   "rick.moleres"
><rick.moleres at xilinx.com>
> >CC: <linuxppc-embedded at ozlabs.org>
> >Subject: RE: question about linux with Xilinx ML-403
> >Date: Wed, 24 May 2006 10:25:10 -0600
> >
> >
> >
> >Ming,
> >
> >
> >
> >
> >
> > >Our best recommendation is to use the drivers/net/xilinx_enet 
directory
> >
> > >for the temac driver and just enable the Xilinx 10/100 Ethernet in
> >
> > >menuconfig.
> >
> >
> >
> >I am not so clear with this. Do you mean that I just copy the source
> >code
> >
> >in the directory of xilinx_gige generated by EDK into the directory of
> >
> >xilinx_enet in linux2.4.20, and then enable the Xilinx 10/100 ethernet
> >in
> >
> >the menuconfig? Can this method realize the 1000M ethernet? The source
> >code
> >
> >file names for Temac (xtemac_xxx.c or .h) are different with the ones
> >for
> >
> >emac (xemac_xxx.c or .h). Can the xtemac files be recognized by the
> >linux
> >
> >kernel?
> >
> >
> >
> >Right - you would need to copy the xtemac* files and the Makefile over,
> >and would have to change the Makefile to make sure it produces
> >xilinx_enet.o instead of xilinx_gige.o.  We haven't tried this, but we
> >don't think there's any reason this shouldn't work.  Can you let us know
> >how it goes?
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>_________________________________________________________________
>免费下载 MSN Explorer:   http://explorer.msn.com/lccn/
>
>
>

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn