question about linux with Xilinx ML-403

[Rick Moleres]

Ming,

Another option for you may be to get MontaVista's latest linuxppc-2.4 kernel tree from source.mvista.com (using rsync), which I believe has the xilinx_gige directory and menuconfig entries.

-Rick

-----Original Message-----
From: Ming Liu [mailto:eemingliu at hotmail.com] 
Sent: Wednesday, May 24, 2006 12:36 PM
To: rick.moleres
Cc: linuxppc-embedded at ozlabs.org
Subject: RE: question about linux with Xilinx ML-403

Dear Rick,
OK. I will try that. However I cannot promise to finish this very soon 
because I am a novice. :) I will let you know if there is any result.

Thanks for your method.

BR
Ming


>From: "Rick Moleres" <rick.moleres at xilinx.com>
>To: "Ming Liu" <eemingliu at hotmail.com>,   "rick.moleres" 
<rick.moleres at xilinx.com>
>CC: <linuxppc-embedded at ozlabs.org>
>Subject: RE: question about linux with Xilinx ML-403
>Date: Wed, 24 May 2006 10:25:10 -0600
>
>
>
>Ming,
>
>
>
>
>
> >Our best recommendation is to use the drivers/net/xilinx_enet directory
>
> >for the temac driver and just enable the Xilinx 10/100 Ethernet in
>
> >menuconfig.
>
>
>
>I am not so clear with this. Do you mean that I just copy the source
>code
>
>in the directory of xilinx_gige generated by EDK into the directory of
>
>xilinx_enet in linux2.4.20, and then enable the Xilinx 10/100 ethernet
>in
>
>the menuconfig? Can this method realize the 1000M ethernet? The source
>code
>
>file names for Temac (xtemac_xxx.c or .h) are different with the ones
>for
>
>emac (xemac_xxx.c or .h). Can the xtemac files be recognized by the
>linux
>
>kernel?
>
>
>
>Right - you would need to copy the xtemac* files and the Makefile over,
>and would have to change the Makefile to make sure it produces
>xilinx_enet.o instead of xilinx_gige.o.  We haven't tried this, but we
>don't think there's any reason this shouldn't work.  Can you let us know
>how it goes?
>
>
>
>
>
>
>
>
>

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn/