Unable to boot a kernel on a MPC8560
CORVELLER Mickael
mickael_corveller at hotmail.com
Wed May 17 21:13:46 EST 2006
> >
> > first of all, I am a newbie in embedded linux systems.
>
>Seems you are also a newbie when it comes to posting to mailing lists
>in general. Posting the same question several times to several
>mailing lists is not a good idea. Please read
>http://www.catb.org/%7eesr/faqs/smart-questions.html
Indeed, I'm not used to write in mailing lists.
>
>
> > The boot loader is U-Boot.
>...
> > Here is the result of one of my tests :
> > -> niot 0
>...
> > -> nbo 0
>
>These are definitely no U-Boot commands.
>
OK, now I know that my boot loader is not U-Boot, now the question is :
what is the boot loader used by my board ?
I have supposed (certainly wrongly) that the firmware provides on the card
was based on U-Boot...mea-culpa.
According to you, is it the boot loader the cause of my problem ?
>Best regards,
>
>Wolfgang Denk
>
>--
>Software Engineering: Embedded and Realtime Systems, Embedded Linux
>Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>He's dead, Jim
> -- McCoy, "The Devil in the Dark", stardate 3196.1
More information about the Linuxppc-embedded
mailing list