Xilinx BSP for linux 2.6

[Ameet Patil]

Hi Ming,

Excellent News!

Don't worry... the problem you are facing could be because of missing
device files in your /dev folder.

Do as follows:
mount the CF card onto your PC and then goto the /dev folder on your
root filesystem in the card. Here run the following commands as root:
# mknod -m 660 console c 5 1
# mknod -m 660 xsa b 254 0
# mknod -m 660 xsa1 b 254 1
# mknod -m 660 xsa2 b 254 2
# mknod -m 660 xsa3 b 254 3
Now there should be a directory tts in your dev. If not create one
"mkdir tts". Then do this in the dev/tts folder,
# mknod -m 660 0 b 4 64

> Also, when I compile the kernel, there is a error. That's in adapter.c
> file, undefined reference to "XAssert". I checked the source code and
I think you have the old patch. If you download the new one, the
compilation problem should not occur. But you resolved it yourself,...
which is good.

Let me know if this works. I shall add this stuff in PART II of the article.

-Ameet

Ming Liu wrote:
> Dear Ameet,
> A good news is that now my 2.6 kernel is running in my ML403 board! 
> According your guidance, first I made the kernel as simple as possible 
> and it works well. Then I included the patch for SystemACE and here is 
> the information shown on the hyper teminal:
> 
> 
> Linux/PPC load: console=ttyS0,9600 root=/dev/xsa3 [    0.000148] 
> Console: colour dummy device 80x25
> [    0.000919] Dentry cache hash table entries: 16384 (order: 4, 65536 
> bytes)
> [    0.002277] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> [    0.012802] Memory: 63104k available (1340k kernel code, 384k data, 
> 76k init,
> 0k highmem)
> [    0.230310] Mount-cache hash table entries: 512
> [    0.238305] VFS: Disk quotas dquot_6.5.1
> [    0.238516] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    0.238817] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
> [    0.239435] JFS: nTxBlock = 493, nTxLock = 3944
> [    0.241883] Initializing Cryptographic API
> [    0.241940] io scheduler noop registered (default)
> [    0.322864] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
> sharing
> disabled
> [    0.324759] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 1) is a 16550A
> [    1.653644] RAMDISK driver initialized: 16 RAM disks of 65536K size 
> 1024 bloc
> ksize
> [    1.745079] loop: loaded (max 8 devices)
> [    1.793392]  xsa: xsa1 xsa2 xsa3
> [    1.839262] mice: PS/2 mouse device common for all mice
> [    1.935059] VFS: Mounted root (ext2 filesystem) readonly.
> [    2.000037] Freeing unused kernel memory: 76k init
> [    2.075656] Warning: unable to open an initial console.
> 
> I use xsa3 as the partition to store the file system. Now the file 
> system is the old one for my 2.4 kernel generated by busybox. Then I 
> think that's why the problem "unable to open an initial console" is 
> generated. Do you have some suggestion on how to solve it? Thanks for 
> your opinion.
> Also, when I compile the kernel, there is a error. That's in adapter.c 
> file, undefined reference to "XAssert". I checked the source code and 
> found that the function of XAssert is defined in the file 
> xbasic_types.c, not the xbasic_types.h. So it cannot be included into 
> adapter.c. And also in the makefile there is no dependency on 
> xbasic_types.c. So I added the defination for this function in 
> adapter.c, copying it from xbasic_types.c. It then worked well.
> Waiting for your guidance. You know, an expert's opinion is always 
> useful for a novice, like me. :)
> 
> Regards
> Ming
> 
> _________________________________________________________________
> 免费下载 MSN Explorer:   http://explorer.msn.com/lccn/ 
>