MPC8272ADS Hangs with gcc 4.0.0 and u-boot 1.1.4

[Addison Baldwin]

Really sorry!

I sent this message to the wrong list.

I'll send it to the U-Boot.

Regards,
Addison Baldwin

On 2/1/06, Addison Baldwin <addison.baldwin at gmail.com> wrote:
> Hi developers
>
> I have a MPC8272ADS board, from Freescale. I'm using low-boot
> configuration (HRCW is 0x0E_74_B2_0A).
>
> I have ELDK 3.1 and ELDK 4.0 installed. I'm using U-Boot 1.1.4. When I
> compile U-Boot with GCC 3.3.3, the board works ok, but not with GCC
> 4.0.0. All the ethernet leds freeze turned on and the Run led too. It
> makes me thinking the board entered some loop state. Nothing appears
> at serial port.
>
> If anyone had this problem, or if anyone have such a configuration
> working (GCC 4 and U-Boot 1.1.4 with this board), any help will be
> very appreciated.
>
> Regards,
> Addison Baldwin
>