AC'97 driver on MontaVista Linx for Xilinx ML403 board

[Yunfei Zhang]

Stephen Neuendorffer,
    Thank you very much. I am using MVL3.1 (2.4 kernel),I only need the function of playback.Could you send a copy of your driver to yunfeizhang at sjtu.edu.cn.   
I am so lucky to meet you.
Yunfei Zhang   
MediaSoC Lab. @IC &System Center of SJTU




Yunfei Zhang
2006-12-09



发件人： Stephen Neuendorffer
发送时间： 2006-12-09 03:14:30
收件人： Yunfei Zhang
抄送： 
主题： RE: AC'97 driver on MontaVista Linx for Xilinx ML403 board

Yunfei,

I have a very simple AC97 driver for the XUPV2P board, which would likely work on the ML403, using the opb_ac97 core
here: http://www.xilinx.com/univ/xupv2p.html

Currently, the timing constraints are rather tight, since the core doesn't use DMA and the buffers are relatively small.
However, I would be happy to share it with you.  Are you using MVL3.0 (2.4 kernel) or MVL4.0 (2.6 kernel)?

Stephen Neuendorffer
Xilinx Research Labs.




From: linuxppc-embedded-bounces+stephen=neuendorffer.name at ozlabs.org [mailto:linuxppc-embedded-bounces+stephen=neuendorffer.name at ozlabs.org] On Behalf Of Yunfei Zhang
Sent: Friday, December 08, 2006 12:00 AM
To: linuxppc-embedded at ozlabs.org
Subject: AC'97 driver on MontaVista Linx for Xilinx ML403 board


Hi All, 
    I am porting a audio decoder to ML403 board, but I find there is no AC'97 driver supported. I am not familiar with the linux driver for powerpc. Could someone give me a copy of AC'97 diver which is compatible for ML403 board or PPC405.If there is none, could you tell me what could I do to alter certain copies or any suggestions.
    Thanks for all your kindness.




Yunfei Zhang
2006-12-08
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20061209/31f65182/attachment.htm