Trouble on building crossover compiler for Synology 8041 PPCbased NAS

[Li Yang-r58472]

http://images.tomshardware.com/2006/06/28/not_going_wrong_with_the_synol
ogy_ds/synology_ds106e_main_board_big.jpg

Here is a picture of the exact model.  I can confirm that it's a
MPC8241.

Best Regards,
Leo
> -----Original Message-----
> From: linuxppc-embedded-bounces+leoli=freescale.com at ozlabs.org
> [mailto:linuxppc-embedded-bounces+leoli=freescale.com at ozlabs.org] On
Behalf Of
> David Hawkins
> Sent: Wednesday, August 09, 2006 12:48 AM
> To: chun fung siu
> Cc: linuxppc-embedded at ozlabs.org
> Subject: Re: Trouble on building crossover compiler for Synology 8041
PPCbased NAS
> 
> chun fung siu wrote:
> > Hi,
> >
> > I recently bought a Synology Network Attached Server DS-106e, run
using
> > a "Linux 2. 4.22-uc-0" Kernel, under 8041 PPC, no "gcc" installed. I
> > want to build a crosslink gcc compiler for it in another "debian 2.6
> > kernel" linux. I find many options in the crosslink build script on
ppc,
> > but can't find any option for 8041 PPC. So what option should I
choose?
> > And further can I put the artifacts just compiled in my Network
Attached
> > Server? So that I can compile anything directly in my NAS.
> 
> The processor is probably an *MPC8241*.
> 
> The DS101g is also an MPC8241. So this should provide you with
> some useful info:
> 
> http://www.nslu2-linux.org/wiki/DS101/HomePage
> http://www.nslu2-linux.org/wiki/DS101/DS101GHardware
> 
> Dave
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded