FW: Re: load u-boot.bin failure with BDI2000

[tuotuo wang]

>From: Shawn Jin <shawnxjin at gmail.com>
>Reply-To: Shawn Jin <shawnxjin at gmail.com>
>To: tuotuo wang <dvdstar at hotmail.com>
>CC: linuxppc-embedded at ozlabs.org
>Subject: Re: load u-boot.bin failure with BDI2000
>Date: Sun, 29 May 2005 11:28:28 -0700
>
> > My target board is SBC8260,my debugger BDI2000,i have complied my 
u-boot
> > file .But here is a mistake when i load it.Now i cann't enter the 
command
> > line of u-boot.here is the display of BDI2000:
> > - TARGET: processing user reset request
> > - TARGET: Target PVR is 0x00810101
> > - TARGET: reseting target passed
> > - TARGET: processing target init list ....
> > *** TARGET: processing target init list failed
> > # PPC: Writing to workspace failed
>
>There is somehting wrong with BDI2000 configuration file. Double check
>what [INIT] section does for your target board.
>
>-Shawn.


You know,my config file of BDI2000 is download from www.denx.de,because 
there have the sbc8260's.My board run the ppcboot at first,and i can use my 
BDI2000 properly with this config file.

_________________________________________________________________
享用世界上最大的电子邮件系统― MSN Hotmail。  http://www.hotmail.com