U-Boot hangs in relocate_code after sw reboot
Jon Loeliger
jdl at freescale.com
Sat Mar 5 03:06:03 EST 2005
On Fri, 2005-03-04 at 09:53, Jaka Močnik wrote:
> hello!
>
> I don't really know if this mailing list is the proper place to direct
> questions regarding U-Boot, but I've seen some preceding posts about it,
> so I thought I'd ask...
Let's start with: The U-Boot list is over at:
u-boot-users <u-boot-users at lists.sourceforge.net>
> I've ported U-Boot over to a custom MPC8560 (PQ3) based board - it works
> well,
Good... So, what version did you start with?
And how custom is it? We just might need a few more details here... :-)
> except that after a sw reboot (from linux kernel or u-boot
> itself),
There were some early releases of 8560 U-Boot code that
didn't do SW Reset right. Let's make sure we are running
a modern U-Boot for the 85xx first.
> it only gets to the part where it relocates itself to RAM and
> then hangs - the last debug output is
There are some U-Boot FAQs down this line too.
> has anyone experienced similar problems? any hints on what to look at?
HTH,
jdl
More information about the Linuxppc-embedded
mailing list