U-Boot hangs in relocate_code after sw reboot

[Kumar Gala]

This is better posted to the u-boot-users list 
(u-boot-users at lists.sourceforge.net)

- kumar

On Mar 4, 2005, at 9:53 AM, Jaka Močnik wrote:

> hello!
>
> I don't really know if this mailing list is the proper place to direct
>  questions regarding U-Boot, but I've seen some preceding posts about 
> it,
>  so I thought I'd ask...
>
> I've ported U-Boot over to a custom MPC8560 (PQ3) based board - it 
> works
> well, except that after a sw reboot (from linux kernel or u-boot
>  itself), it only gets to the part where it relocates itself to RAM and
>  then hangs - the last debug output is
>
>  Relocating code to 07fd4000...
>
> and the famous
>
> Now running in RAM - U-Boot at: 07fd4000 never shows up.
>
> has anyone experienced similar problems? any hints on what to look at?
>
> regards,
>          jaKa
>
> -- 
>
>  w3: http://fish.homeunix.org/people/jaka
> email: jaka at activetools.si
>
> _______________________________________________
> Linuxppc-embedded mailing list
>  Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded