[RFC PATCH 4/4]: PHY Abstraction Layer III (now with more splitiness)
Andy Fleming
afleming at freescale.com
Tue Jul 26 06:31:26 EST 2005
Ok, I've been convinced to send patch 4 to the embedded list. Here it is,
these are the platform changes to use the gianfar driver with the PHY
Abstraction Layer.
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -53,6 +53,10 @@
#include <syslib/ppc85xx_setup.h>
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
/* ************************************************************************
*
* Setup the architecture
@@ -64,6 +68,7 @@ mpc8540ads_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
@@ -90,34 +95,35 @@ mpc8540ads_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
if (pdata) {
pdata->board_flags = 0;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 3;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_3;
memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
}
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -58,6 +58,10 @@
extern void cpm2_reset(void);
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
/* ************************************************************************
*
* Setup the architecture
@@ -70,6 +74,7 @@ mpc8560ads_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
cpm2_reset();
@@ -88,24 +93,28 @@ mpc8560ads_setup_arch(void)
mpc85xx_setup_hose();
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -395,6 +395,9 @@ mpc85xx_cds_pcibios_fixup(void)
TODC_ALLOC();
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+
/* ************************************************************************
*
* Setup the architecture
@@ -406,6 +409,7 @@ mpc85xx_cds_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
@@ -449,44 +453,42 @@ mpc85xx_cds_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = -1;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_0;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_1;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -92,6 +92,9 @@ sbc8560_early_serial_map(void)
}
#endif
+static const char *GFAR_PHY_25 = "phy0:25";
+static const char *GFAR_PHY_26 = "phy0:26";
+
/* ************************************************************************
*
* Setup the architecture
@@ -103,6 +106,7 @@ sbc8560_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
@@ -127,24 +131,26 @@ sbc8560_setup_arch(void)
invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[25] = MPC85xx_IRQ_EXT6;
+ mdata->irq[26] = MPC85xx_IRQ_EXT7;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT6;
- pdata->phyid = 25;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_25;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT7;
- pdata->phyid = 26;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_26;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -93,6 +93,9 @@ static u8 gp3_openpic_initsenses[] __ini
0x0, /* External 11: */
};
+static const char *GFAR_PHY_2 = "phy0:2";
+static const char *GFAR_PHY_4 = "phy0:4";
+
/*
* Setup the architecture
*/
@@ -102,6 +105,7 @@ gp3_setup_arch(void)
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
cpm2_reset();
@@ -120,23 +124,26 @@ gp3_setup_arch(void)
mpc85xx_setup_hose();
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[2] = MPC85xx_IRQ_EXT5;
+ mdata->irq[4] = MPC85xx_IRQ_EXT5;
+ mdata->irq[31] = -1;
+ mdata->paddr += binfo->bi_immr_base;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 2;
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_2;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 4;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
+ pdata->bus_id = GFAR_PHY_4;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -25,19 +25,20 @@
/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
*/
+struct gianfar_mdio_data mpc85xx_mdio_pdata = {
+ .paddr = MPC85xx_MIIM_OFFSET,
+};
static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
@@ -46,7 +47,6 @@ static struct gianfar_platform_data mpc8
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
@@ -55,7 +55,6 @@ static struct gianfar_platform_data mpc8
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
@@ -64,7 +63,6 @@ static struct gianfar_platform_data mpc8
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
@@ -73,11 +71,10 @@ static struct gianfar_platform_data mpc8
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
static struct gianfar_platform_data mpc85xx_fec_pdata = {
- .phy_reg_addr = MPC85xx_ENET1_OFFSET,
+ .device_flags = 0,
};
static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
@@ -718,6 +715,12 @@ struct platform_device ppc_sys_platform_
.flags = IORESOURCE_IRQ,
},
},
+ },
+ [MPC85xx_MDIO] = {
+ .name = "fsl-gianfar_mdio",
+ .id = 0,
+ .dev.platform_data = &mpc85xx_mdio_pdata,
+ .num_resources = 0,
},
};
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ b/arch/ppc/syslib/mpc85xx_sys.c
@@ -24,19 +24,19 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8540",
.mask = 0xFFFF0000,
.value = 0x80300000,
- .num_devices = 10,
+ .num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
+ MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8560",
.mask = 0xFFFF0000,
.value = 0x80700000,
- .num_devices = 19,
+ .num_devices = 20,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -45,14 +45,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
- MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2,
+ MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8541",
.mask = 0xFFFF0000,
.value = 0x80720000,
- .num_devices = 13,
+ .num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -60,13 +60,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_PERFMON, MPC85xx_DUART,
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8541E",
.mask = 0xFFFF0000,
.value = 0x807A0000,
- .num_devices = 14,
+ .num_devices = 15,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -74,13 +75,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8555",
.mask = 0xFFFF0000,
.value = 0x80710000,
- .num_devices = 19,
+ .num_devices = 20,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -91,13 +93,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
MPC85xx_CPM_USB,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8555E",
.mask = 0xFFFF0000,
.value = 0x80790000,
- .num_devices = 20,
+ .num_devices = 21,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
@@ -108,6 +111,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
MPC85xx_CPM_USB,
+ MPC85xx_MDIO,
},
},
/* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
@@ -115,104 +119,112 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8548E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
- .num_devices = 13,
+ .num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8548",
.mask = 0xFFFF00F0,
.value = 0x80310010,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8547E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
- .num_devices = 13,
+ .num_devices = 14,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8547",
.mask = 0xFFFF00F0,
.value = 0x80310010,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8545E",
.mask = 0xFFFF00F0,
.value = 0x80390010,
- .num_devices = 11,
+ .num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8545",
.mask = 0xFFFF00F0,
.value = 0x80310010,
- .num_devices = 10,
+ .num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8543E",
.mask = 0xFFFF00F0,
.value = 0x803A0010,
- .num_devices = 11,
+ .num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ MPC85xx_MDIO,
},
},
{
.ppc_sys_name = "8543",
.mask = 0xFFFF00F0,
.value = 0x80320010,
- .num_devices = 10,
+ .num_devices = 11,
.device_list = (enum ppc_sys_devices[])
{
MPC85xx_eTSEC1, MPC85xx_eTSEC2,
MPC85xx_IIC1, MPC85xx_IIC2,
MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
MPC85xx_PERFMON, MPC85xx_DUART,
+ MPC85xx_MDIO,
},
},
{ /* default match */
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
--- a/include/asm-ppc/mpc85xx.h
+++ b/include/asm-ppc/mpc85xx.h
@@ -67,6 +67,8 @@ extern unsigned char __res[];
#define MPC85xx_DMA3_SIZE (0x00080)
#define MPC85xx_ENET1_OFFSET (0x24000)
#define MPC85xx_ENET1_SIZE (0x01000)
+#define MPC85xx_MIIM_OFFSET (0x24520)
+#define MPC85xx_MIIM_SIZE (0x00018)
#define MPC85xx_ENET2_OFFSET (0x25000)
#define MPC85xx_ENET2_SIZE (0x01000)
#define MPC85xx_ENET3_OFFSET (0x26000)
@@ -132,6 +134,7 @@ enum ppc_sys_devices {
MPC85xx_eTSEC3,
MPC85xx_eTSEC4,
MPC85xx_IIC2,
+ MPC85xx_MDIO,
};
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -47,14 +47,19 @@
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
- u32 phy_reg_addr;
/* board specific information */
u32 board_flags;
- u32 phy_flags;
- u32 phyid;
- u32 interruptPHY;
+ const char *bus_id;
u8 mac_addr[6];
+};
+
+struct gianfar_mdio_data {
+ /* device specific information */
+ u32 paddr;
+
+ /* board specific information */
+ int irq[32];
};
/* Flags related to gianfar device features */
More information about the Linuxppc-embedded
mailing list