mpc8xx and ld.so problem

[Wolfgang Denk]

In message <42D58861.5040900 at chello.nl> you wrote:
> 
> >>It appeard that on my mpc862 target I had also this problem. I am using
> >>ELDK3.1.1 which includes a 2.4.25 kernel.
> >
> >No, most definitely not.
> >
> I don't understand this, on
> /pub/Linux/distributions/eldk/3.1.1/ppc-linux-x86/distribution/common
> there are the sources of a 2.4.25 kernel.

Yes, sure. But most definitely you did not have *this* problem.
You have a *different* one.

> >I bet that this is a FAQ. Your SDRAM initialization is broken.
> >
> This was one of my guesses also. Since this is beyond my knowledge, I 
> had the parametes initialisation parameters compared to an other 
> platform which did not had the problems (rtos based), the same 
> parameters were used. I did not investigate it any further.

This *is* a FAQ. Please go and read the documentation.
See http://www.denx.de/twiki/bin/view/DULG/UBootCrashAfterRelocation

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Obviously, a major malfunction has occurred."
              -- Steve Nesbitt, voice of Mission Control, January 28,
                 1986, as the shuttle Challenger exploded within view
                 of the grandstands.