Portin Linux2.6.13 on Custom build MPC860T board

[venkatajagadeesh p]

    We are trying to port Linux-2.6.13 on Custom build board, We gone through some of the threads and done those modifications for initializing the console. But it was not working.  We are sending the output data and config file.
     
  
U-Boot 1.0.2 (Oct 13 2005 - 10:06:32)
  CPU:   XPC86xxxZPnnD3 at 60 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
Board: FADS with db MPC860T rev ENG
DRAM:  (64 MB SDRAM) unknown dramdelay (0x1) - defaulting to 70 ns64 MB
ok1
ok2
functions are over
Top of RAM usable for U-Boot at: 04000000
Reserving 141k for U-Boot at: 03fdc000
Reserving 640k for malloc() at: 03f3c000
Reserving 60 Bytes for Board Info at: 03f3bfc4
Reserving 48 Bytes for Global Data at: 03f3bf94
Stack Pointer at: 03f3bf78
New Stack Pointer is: 03f3bf78
  memcopy over
Now running in RAM - U-Boot at: 03fdc000
FLASH:
in flash_get_size       micron is identified ffff
device id in flash.c 18
device id correct
  in flash_get_size       micron is identified 1
device id in flash.c 18
device id correct
32 MB
In:    serial
Out:   serial
Err:   serial
KGDB:  [on SMC2] kgdb ready
ready
Net:   FEC ETHERNET
ent into mainloop
Hit any key to stop autoboot:  0
=>loadb 0x100000 57600
## Ready for binary (kermit) download to 0x00100000 at 57600 bps...
## Total Size      = 0x000e9e5d = 958045 Bytes
## Start Addr      = 0x00100000
=>loadb 0x400000 57600
## Ready for binary (kermit) download to 0x00400000 at 57600 bps...
## Total Size      = 0x0039c124 = 3784996 Bytes
## Start Addr      = 0x00400000
=>bootm 0x100000 0x400000
## Booting image at 00100000 ...
   Image Name:   Linux-2.6.13
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    957981 Bytes = 935.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... gunzip function called
OK
do_bootm_linux called ...do_bootm_linux  after ...part2 do_boot_linux before RAM
 Disk image loading ...
## Loading RAMDisk Image at 00400000 ...
   Image Name:   Ramdisk image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    3784932 Bytes =  3.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
data is non zero
   Loading Ramdisk to 03b9f000, end 03f3b0e4 ... OK
## Transferring control to Linux (at address 00000000) ...



		
---------------------------------
Yahoo! Shopping
 Find Great Deals on Holiday Gifts at Yahoo! Shopping 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051229/8790c835/attachment.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: .config
Url: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051229/8790c835/attachment.txt