Help required on mpc8260 kernel boot

[Wolfgang Denk]

In message <OFCBD37606.7E278616-ON652570D0.0028C041-652570D0.00360A00 at tcs.com> you wrote:
> 
> I am using customs board with MPC8260 processor. I have RAM version of 
> U-Boot and I am able to get U-Boot prompt when I load and run u-bbot.srec 
> by TRACE32. My memory map is as follows
> 
> SDRAM start address :0x30000000  and 128MB
> Flash start address: 0x00000000    and 1MB

One of your fellows (mail address pritha.bhattacharya at tcs.com) posted
this before, and received pretty clear hints that your  configuration
is not correct.

Also, you continue to ignore answers from the FAQs.

Please read the answers you received before, and  follow  the  advice
given.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
panic: can't find /