??: Some version different

[Wolfgang Denk]

In message <A9DE2BAF233E444FA9C5E77A5825A01E86505D at ydmail.sbell.com.cn> you wrote:
>
>   It is the "r3" register data wrong transfer from ppcboot  to kernel. I
> don't know why. very strange. !!!

I'm sure that PPCBoot passes a valid pointer. If you  don;t  see  the
expected  data,  then  you  should probably go back to square one and
read the FAQ: 
http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel

>   The CONFIG_HD860 cannot be compiled in kernel. I don't know either.
> There is no error or warring during config and make.

There is a bug (at least one) n your modifications to the Linux kernel.

>    Then "Oops: kernel access of bad area, sig: 11" and stopped.
>  
>   How is the "with no serial options enabled" ? is it need any config
> with "make menuconfig" ?

I don't know your hardware.
I don't know why you are using  obsolete  versions  of  the  software
(like PPCBoot) for any current work.
I don't know which modifications you made to U-Boot to make it  work
on your hardware, or if these modifications are working at all.
I don't know which modifications you made to Linux.

I cannot help you. Hire an expert.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is nothing in this world constant but inconstancy.      - Swift