The kernel halt after "transferring control to linux(0x000000)..."on HD860(MPC860SR) board kernel 2.4.25, and 2.6.12

[Debora Liu]

Hello, FCG WANG Baohua

In message <2005-08-05 09:11:25 Baohua.WANG at alcatel-sbell.com.cn> you wrote:

>Dear Gala:
>  I meet a problem when porting kernel  2.4.25,and 2.6.12 to a HD860 board: Whatever your config, or whatever you patch, set ppcboot enviroment, 
>  whether use ramdisk or nfs, the kernel  all display a message then halt.
>  "transferring control to linux (0x000000) ..."
Where are "transferring control to linux (0x000000) ..." ?
If are you use in The kernel 2.4.25 is from ELDK 3.1.1?
Please check you uboot.

= = = = = = = = = = = = = = = = = = = =
				 
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Debora Liu
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡deboralh at fel.com.cn
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-08-05