U-BOOT for MPC860T customized board

RamanaYV venkataramana_y at mic.co.in
Fri Feb 27 17:11:07 EST 2004

I have customised board with MPC860T,16MBytes of flash,16MBytes of SDRAM and
ethernet interface.

CS0 is using for flash and CS1 is for SDRAM.

is there any standard board with this configuration.

so,that i can use that board configuration for U-BOOT.

thanking u

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

More information about the Linuxppc-embedded mailing list