2.6 kernel ppc tree

[Rod Boyce]

I downloaded it from www.kernel.org I was very surprised how far I got but there you go.

Regards,
Rod Boyce

-----Original Message-----
From: Mike Welliington [mailto:wellington at lucent.com]
Sent: Wednesday, February 18, 2004 10:47 AM
To: Rod Boyce
Cc: Lokesh Kumar; linuxppc-embedded at lists.linuxppc.org
Subject: Re: 2.6 kernel ppc tree


Rod -
   Can I ask *where* you got your 2.6.1 kernel?  I do not see it
in the Monta Vista archives, or in the archives from www.penguinppc.org.

-mike wellington
 wellington at lucent.com


Rod Boyce wrote:

>I downloaded the the 2.6.1 Linux kernel and compiled it for the RPX-Lite board.  I discovered that the UART driver in arch/ppc/8xx_io/ has not been ported to the 2.6 kernel otherwise I had no problems.  I have not had time to get back to the 2.6 porting effort and update the uart.c file.  If ther eis another one out there I could try it out but that is where I left my effort.  Otherwise I would guess you may not have too many more problems but I have not been able to spend much time on this.
>
>Regards,
>Rod Boyce
>
>-----Original Message-----
>From: owner-linuxppc-embedded at lists.linuxppc.org
>[mailto:owner-linuxppc-embedded at lists.linuxppc.org]On Behalf Of Lokesh
>Kumar
>Sent: Wednesday, February 18, 2004 10:22 AM
>To: linuxppc-embedded at lists.linuxppc.org
>Subject: 2.6 kernel ppc tree
>
>
>
>Is there a tree for ppc for 2.6 kernel, which I can download and compile for
>mpc8xx based boards? Any help is welcome.
>
>Lokesh Kumar
>Wireless Matrix USA Inc.
>703-262-4032
>
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/