i2c on mpc5200

[ivica at asist-traffic.com]

Wolfgang Denk wrote:

>We did, in 2.4, where it works OK, at least as long as  the  hardware
>is OK (some of the earlier Icecube boards had some issues).
>
>Best regards,
>
>Wolfgang Denk
>
>  
>
This is true. I get this output when I boot latest kernel from DENX.
I think I decided I will go to 2.6 because it had the preemptible kernel
option which I will probably need later on.
******************************************************
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-algo-pcf.o: i2c pcf8584 algorithm module
i2c-proc.o version 2.6.1 (20010830)
ttyS0 on PSC1
ttyS1 on PSC2
ttyS2 on PSC3
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
loop: loaded (max 8 devices)
i2c-algo-5xxx.o: scanning bus Icecube I2C module #2 interface...
..................................................(0x32).............................(0x50)(0x51)(0x52)(0x53)(0x54)(0x55)(0x56)(0x57).......................................(0x)
i2c-icecube.o: I2C module #2 installed
eth0: Phy @ 0x0, type LXT971 (0x001378e2)
*****************************************************

Root file system on NFS doesn't work though. I get this errors:
******************************************************
Looking up port of RPC 100003/2 on 192.168.254.58
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
MPC5xxx_FEC_IEVENT_RFIFO_ERROR
*******************************************************

But this is not that big of a problem. I'll just boot stand alone images.
So, for writing a driver for my RTC i2c module I should look at
Documentation/i2c/writing-clients right?
And it should be under
[*] I2C Chips support  --->  right?

Best regards,
Ivica