[PATCH][PPC32] Fix gianfar netdriver oops when using bootp...

Kumar Gala kumar.gala at freescale.com
Thu Dec 2 19:14:36 EST 2004


Fun with mailers.  Try this url:

http://tinyurl.com/6skww

- kumar

On Dec 2, 2004, at 2:07 AM, Gerhard Jaeger wrote:

> Hi,
>
> On Wednesday 01 December 2004 23:19, Kumar Gala wrote:
>  > There is some belief that the following patch should fix the issue:
>  >
> > http://linux.bkbits.net:8080/linux-2.5/cset@1.2249.2.2? 
> nav=index.html|ChangeSet at -3d
>  >
> > I would be interested to know if this helps w/o your patch.
>
> I'd like to cross-check this, but are you sure, you're referencing the 
> correct
>  changeset? Currently I only got:
>  Error 500
>  Unable to find revision 1.2249.2.2
>
> Gerhard
>
> >
> > - kumar
>  >
> > On Dec 1, 2004, at 10:07 AM, Gerhard Jaeger wrote:
>  >
> > > Hi,
>  > >
>  > > this patch fixes an issue, that occurs on my MPC8541CDS, when 
> trying to
>  > >  use bootp to get the IP parameters. It seems, that the patch 
> only 
>  > > cures
>  > >  the symptom but obviously not the cause ;)
>  > >
>  > > Signed-off-by: Gerhard Jaeger <gjaeger at sysgo.com>
> > >
>  > > --- linux-2.6.10-rc2-mm4/drivers/net/gianfar.c.orig     
> 2004-11-15 
> > > 02:26:34.000000000 +0100
>  > >  +++ linux-2.6.10-rc2-mm4/drivers/net/gianfar.c  2004-12-01 
> > > 17:00:19.000000000 +0100
>  > >  @@ -1477,6 +1477,9 @@ static void gfar_phy_change(void *data)
>  > >          struct gfar_private *priv = netdev_priv(dev);
> > >         int result = 0;
>  > >   
>  > >  +       if( !priv->mii_info->phyinfo )
>  > >  +               return;
>  > >  +
>  > >          /* Delay to give the PHY a chance to change the
>  > >           * register state */
> > >          msleep(1);
>  >
> >




More information about the Linuxppc-embedded mailing list