[PATCH][PPC32] Fix gianfar netdriver oops when using bootp...

[Gerhard Jaeger]

Hi,

On Wednesday 01 December 2004 23:19, Kumar Gala wrote:
> There is some belief that the following patch should fix the issue:
> 
> http://linux.bkbits.net:8080/linux-2.5/cset@1.2249.2.2? nav=index.html|ChangeSet at -3d
> 
> I would be interested to know if this helps w/o your patch.

I'd like to cross-check this, but are you sure, you're referencing the correct
changeset? Currently I only got:
Error 500
Unable to find revision 1.2249.2.2

Gerhard

> 
> - kumar
> 
> On Dec 1, 2004, at 10:07 AM, Gerhard Jaeger wrote:
> 
> > Hi,
> >
> > this patch fixes an issue, that occurs on my MPC8541CDS, when trying to
> >  use bootp to get the IP parameters. It seems, that the patch only  
> > cures
> >  the symptom but obviously not the cause ;)
> >
> > Signed-off-by: Gerhard Jaeger <gjaeger at sysgo.com>
> >
> > --- linux-2.6.10-rc2-mm4/drivers/net/gianfar.c.orig     2004-11-15  
> > 02:26:34.000000000 +0100
> >  +++ linux-2.6.10-rc2-mm4/drivers/net/gianfar.c  2004-12-01  
> > 17:00:19.000000000 +0100
> >  @@ -1477,6 +1477,9 @@ static void gfar_phy_change(void *data)
> >          struct gfar_private *priv = netdev_priv(dev);
> >         int result = 0;
> >   
> >  +       if( !priv->mii_info->phyinfo )
> >  +               return;
> >  +
> >          /* Delay to give the PHY a chance to change the
> >           * register state */
> >          msleep(1);
> 
>