Ebony PPC440GP & linux 2.6.3

[Brian Hawley]

Hello.

It is clear from the archives that people have gotten the Ebony 440GP
working with linux.

We are using the linux 2.6.3 kernel, and have had little luck getting it
booted up.

We are using u-boot as the boot loader to load the zImage.

It decompresses the kernel, and says it transfers control, but then just stops.

Any suggestions or directions would be most helpful and appreciated.


Thanks,

-- Brian




+==========================================================+
Brian N. Hawley                 bhawley at luminex.com
Luminex Software, Inc.          http://www.luminex.com
PO Box 5908                     voice: 909-781-4100 x112
Riverside, CA  92517            fax: 909-781-4105
+==========================================================+


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/