cfi probe for two different flash devices

[Gary Thomas]

On Mon, 2003-10-06 at 00:20, J.Murali wrote:
> hi all,
>
> i am working on a custom board(Redwood6) using IBM ppc 405. I am using
> the Montavista's kernel 2.4.17. We have one AMD flash of 4 MB and one
> Intel flash of 16 MB on our board. There are 4 mtd partitions are in AMD
> and Intel flash is used as storage space of 5 mtd partition.
>
> AMD partitions
> -----------------
> 1. Bootparams
> 2. Bootldr
> 3. kernel
> 4. Filesystem1
>
> Intel partition
> --------------
> 5. Filesystem2
>
> In the CFI probe, the kernel detects only one flash either AMD or INTEL
> (Which address we specify as window address). What i have to to do for
> cfi to detect both flash devices.
>
> Any suggestions are appreciated
>

This question would be best asked of the MTD folks (cc'd), but I think
you'll need a customized "map" function that recognizes these two FLASH
device types and creates the appropriate MTD sub-devices appropriately.

--
Gary Thomas <gary at mlbassoc.com>
MLB Associates


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/