MPC8245 and PCF8563 RTC
Wolfgang Denk
wd at denx.de
Sat Jul 26 02:15:36 EST 2003
In message <1059143087.4969.21.camel at triffo.arlut.utexas.edu> you wrote:
>
> Do any of the boards you mentioned use the same i2c-adap driver that I
> mentioned I was using for my board? Is there a better i2c-adap driver
No, they don't.
> for an MPC8245 board? I think the i2c driver for my board is the
> culprit, not the driver for the real time clock. As always all help is
> appreciated.
...
> > Not with a MPC8245, but with MPC8240 (on CU824 board), MPC8250 (on
> > PM825 board), and MPC8260 CPUs (on PM826 and CPU86 boards).
CU824 uses i2c-algo-8240 + i2c-cu824
PM825 and PM826 use i2c-algo-8260 + i2c-pm826
CPU86 uses i2c-algo-8260 + i2c-cpu86
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Administration: An ingenious abstraction in politics, designed to
receive the kicks and cuffs due to the premier or president.
- Ambrose Bierce
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list