FW: MBX860 loading denx kernel image with EPPC-Bug

[Amit.Lubovsky at infineon.com]

> Hi,
>
> I try to load linux kernel 2.4.20 from denx (vmlinux) to MBX860 board
> with the on board boot loader (EPPC-Bug) without success and get
> the following:
>
> EPPC-BUG output
> ---------------
> Controller LUN =00? 20
> Device LUN =00?
> Node Control Memory Address =00FC8000?
> Client IP Address =192.168.5.34?
> Server IP Address =192.168.5.1?
> Subnet IP Address Mask =255.255.255.0?
> Broadcast IP Address =255.255.255.255?
> Gateway IP Address =192.168.5.1?
> Boot File Name ("NULL" for None) =vmlinux?
> Argument File Name ("NULL" for None) =?
> Boot File Length =00000000?
> Boot File Byte Offset =00000000?
> BOOTP/RARP Request Retry =02?
> TFTP/ARP Request Retry =02?
> Trace Character Buffer Address =00000000?
> BOOTP/RARP Request Control: Always/When-Needed (A/W)=W?
> BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y?
>
> Update Non-Volatile Memory (Y/N)? y
>
> EPPC-Bug>PL 20 00
> Network Booting from: MPC860, Controller 20, Device 0
> Loading: vmlinux
>
> Client IP Address = 192.168.5.34
> Server IP Address = 192.168.5.1
> Gateway IP Address = 192.168.5.1
> Subnet IP Address Mask = 255.255.255.0
> Boot File Name = vmlinux
> Argument File Name =
>
> Bytes Received =&1338333, Bytes Loaded =&1338333
> Bytes/Second =&446111, Elapsed Time =3 Second(s)
>
> Exception: Implementation Dependent Software Emulation
> SRR0 =C0000000 SRR1 =00001002 Vector-Offset =01000
> IP =C0000000 MSR =00001002 CR =00000000
> R0 =00000000 R1 =00FB4000 R2 =00000000 R3 =00FF4570
> R4 =00000000 R5 =00000000 R6 =00000000 R7 =00000000
> R8 =00000000 R9 =00000000 R10 =00000000 R11 =00000000
> R12 =00000000 R13 =00000000 R14 =00000000 R15 =00000000
> R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000
> R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000
> R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000
> R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000
> SPR1 =00000000 SPR8 =00000000 SPR9 =00000000
> C0000000 0A0A0A0A TDI $10,R10,$A0A
> EPPC-Bug>
> Any idea what am I doing wrong?
> Thanks,
> Amit.
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/