Can not see any infomation on the console when using U-Boot 1.0.0 booting my board

[Wolfgang Denk]

In message <200312061024.EAA19753 at lists.linuxppc.org> you wrote:
>
> My reference board is Sandpoint X2.
...
> and Sandpoint X2 was booted smoothly.
>    Then I modified the serial port information in
> ~~/u-boot1.0.0/include/configs/sandpoint8240.h because the serial port

You should rather create your own board config file.

> address on my board is different from that on Sandpoint X2. Below are my
> modification:
...
>  	After "make" and "burn u-boot.bin in flash" I reset my board
> and I saw nothing on my console:(
> 	Any suggestion? Thanks in advance.

Well, what do you expect? Remote debugging through a telepathy link?

Obviously your changes are wrong and/or insufficient to  make  U-Boot
work on your baord.

Attach your BDI2000, fire up GDB and check what's going on there.


Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Name one thing windows is better than unix in?
                                          Making money for Microsoft?
         -- Randal L. Schwartz in <8cvi5t4c3t.fsf at gadget.cscaper.com>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/