MPC8260 serial on SCC support

[Hollis Blanchard]

Dejan Jovanovic wrote

>
>Now that I boot I get the following output.
>After the 'starting xinetd' is completed sucessfuly, my serial output is stuck.
>However I can telnet to my board.
>This means that there is some problem with the serial? (maybe 'getc' or
>something like this).
>
I suspect you have not enabled a getty on your serial port (see
/etc/inittab). Without that you will not see a login prompt there.

-Hollis


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/