Downloading Linux image using Riscwatch
Aman
aman at mistralsoftware.com
Wed Oct 23 04:24:31 EST 2002
Hi
I have ported rom monitor code[Openbios from IBM] for my custom
board[PPC440GP Processor]. The custom board doesn't support ethernet. Now I
want to download a linux image to the RAM of my custom board. What linux
image I have to build to download to RAM using JTAG of Riscwatch Debugger .
Thanking you in advance
Regards
Aman
----- Original Message -----
From: "Wolfgang Denk" <wd at denx.de>
To: "Aman" <aman at mistralsoftware.com>
Cc: "linuxppc embedded" <linuxppc-embedded at lists.linuxppc.org>
Sent: Wednesday, October 02, 2002 12:10 AM
Subject: Re: Downloading Linux image using Riscwatch
> In message <001b01c26976$233e0640$370da8c0 at aman> you wrote:
> >
> > I am using PPC 440GP processor on custom board. This board doesnt not
have
> > Ethernet support and there is no rom monitor code in the board. Is it
> > possible to download the Linux image to the board using JTAG . If so
what
> > type of image should I build.
>
> You can download the kernel, but it will not run ;-)
>
> The Linux kernel relies on a lot of initialization to be done by the
> firmware - things like initializing and sizing the memory, passing
> boot arguments etc.
>
> I suggest you start porting PPCBoot.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering: Embedded and Realtime Systems, Embedded Linux
> Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
> The first 90% of a project takes 90% of the time, the last 10% takes
> the other 90% of the time.
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list