Console problem with MPC855T + Linux 2.4.3

[Lin, Nan-Hung]

I run the linux 2.4.3 on a MPC855T-based system
with the SMC1 as the console. The baud rate of
the SMC1 is 38400 bps.

The console works fine for a few days (weeks
sometimes) from the system booting up. Then,
the console does not accept any input. At the
same time, the console still output (it shows
messages correctly).

What's the problem ?
Please help.  Thanks


-----------------------------------------------
Carl Lin                    carl at fiberlogic.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/