INFO on IBM Spruce board

[vnair at hss.hns.com]

hello list,

Can anyone show me the pointers for getting started with porting linux on IBM
SPRUCE board. Also from where can i get necessary h/w manuals for the board. I
have checked up IBM site for this, but lots of links seems to be missing now.

some characteristics of the board are
1. 750 based ppc
2. CPC700 system controller
3. 128 MB RAM

Necessary resources for setting up the development environment like Vision Probe
are available.

Which kernel version shall i start with and some documents for porting
guidelines will be helpful. I tried downloading kernel using bitkeeper, but
somehow bitkeeper is not working from behind the firewall.

Thanks
- Vikram

DISCLAIMER: This message is proprietary to Hughes Software Systems
Limited (HSS) and is intended solely for the use of the individual
to whom it is addressed. It may contain  privileged or confidential
information  and should not be circulated or used for any purpose other
than for what it is intended. If you have received this message in error,
please notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly prohibited from using,
copying, altering, or disclosing the contents of this message. HSS accepts
no responsibility for loss or damage arising from the use of the information
transmitted by this email including damage from virus.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/