AW: I need help getting pcmcia working with a FADS board

[Fend, Matthias]

if we talk about  m8xx_pcmcia_kernel-2.4.-19pre6.patch the patch does this:

- add the file m8xx_pcmcia.c into your kernel driver tree ( ...
/drivers/pcmcia/m8xx_pcmcia.c )
- add a entry for the new file into Config.in
- add a entry for the new file into Makefile

thats all

the patch was made from linuxppc_2_4_devel - but you can do these few changes
manually...

matthias

> -----Ursprüngliche Nachricht-----
> Von:	Jacky Wang [SMTP:jacky at premierme.com.tw]
> Gesendet am:	Mittwoch, 24. April 2002 12:51
> An:	boehringer at snom.de
> Cc:	May Ling List
> Betreff:	RE: I need help getting pcmcia working with a FADS board
>
>
> Sven,
>
> what does it patch for?
> 	which kernel source?
> 	or which pcmcia-cs source?
>
> Jacky
>
> > -----Original Message-----
> > From: owner-linuxppc-embedded at lists.linuxppc.org
> > [mailto:owner-linuxppc-embedded at lists.linuxppc.org]On Behalf Of
> > Sven Boehringer
> > Sent: Tuesday, April 23, 2002 2:26 PM
> > To: Jacky Wang
> > Cc: May Ling List
> > Subject: Re: I need help getting pcmcia working with a FADS board
> >
> >
> > Hi Jacky,
> >
> > Matthew provided me with a patch for getting the pcmcia working.
> > I still have not enough time to test that patch. Here it goes:
> >
> >
> > Regards,
> >
> > 	Sven
> >
> >
> > Jacky Wang wrote:
> > >
> > > Hi everyone,
> > >
> > > I need help getting pcmcia working with a FADS board.
> > >
> > > Did someone finish the driver?
> > > If Yes, would you mind to share it with me?
> > >
> > > Jacky
> > >
> >
> >
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/