SCC3 console problem on MPC860

Wolfgang Denk wd at denx.de
Sat Mar 31 01:37:46 EST 2001


In message <3AC49EC3.978D9A4A at snmc.com> you wrote:
>
> I had problems trying to get the uart.c driver to do what you wanted as
> well.  I don't think it was really meant to support both SCC and SMC at
> the same time.  I ended up splitting the driver into two different

I cannot verify this problem.

> drivers, making one work just for the SCC, and the other only for the
> SMC.  This works quite well.

This is really not needed.

We have tested the normal uart driver in a setup running on 5  serial
ports  (2  x  SMC, 3 x SCC, with Ethernet of the 4th SCC). No serious
load tests so  far,  but  basic  I/O  functions  worked  without  any
problems.

> The code is in the QSLinux release, which you can download from
> ftp:://qslinux.org.  When you untar the kernel you can find the two
> drivers in the directory snmc/qslinux/kernel/drivers/char.

Ummm... AFAIK QSLinux is based on a 2.2.5  kernel?  That's  _awfully_
old.  I  can  imagine  that there were lots of problems with the uart
driver at this time. And other bugs as well.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"How is this place run - is it an anarchy?"
"No, I wouldn't say so; it is not that well organised..."

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/






More information about the Linuxppc-embedded mailing list