initrd problems on CLLF860T, please help.

[Jari Nguyen Trung Thanh]

pls make sure you have the link in
/opt/hardhat/devkit/ppc/8xx/powerpc-hardhat-
linux -> /
you can check it in the past mailling list
hope this help,
Jari


----- Original Message -----
From: "Zheng, Haifei" <haifei.zheng at intel.com>
To: <linuxppc-embedded at lists.linuxppc.org>
Cc: <greyham at research.canon.com.au>
Sent: Thursday, February 15, 2001 3:00 AM
Subject: initrd problems on CLLF860T, please help.


>
> Hi there,
>
> We are trying to boot our CLLF860T board with an initrd. We are using
Monta
> Vista Hard Hat (kernel 2.2.14) and we built out own ramdisk image. ( I
know
> there is an example ramdisk.image.gz from Hard Hat but haven't found it)
and
> we are getting the following boot messages:
>
> Load menu: press 123456789T key : <?> : T
>  target IP address : 0A14140A
>  target file name  : current-initrd
>  address bias      : 0
> Starting tftp download:
> inetARP(): OK
> .1.2.4.8.16.32.64.128.256.512.1024.2048.4096.8192.16384
> load_tftp(): OK
> 1359955 data bytes, 17216 S-records, 2657 tftp blocks, 0 repeated blocks
> start address = 00200000
> load_tftp_toMem(): OK
> Transferring control to downloaded program
> loaded at:     00200000 0020C580
> relocated to:  00180000 0018C580
> board data at: 001801C8 001801E4
> relocated to:  00200100 0020011C
> zimage at:     00207000 0026CB2E
> initrd at:     0026CB2E 00285258
> avail ram:     00286000 01000000
>
> Linux/PPC load: root=/dev/ram
> misc.c
> Uncompressing Linux...done.
> Now booting the kernel
> Linux version 2.2.14 (root at shark) (gcc version 2.95.2 19991030 (2.95.3
> prereleas
> e/franzo)) #541 Wed Feb 14 09:57:22 PST 2001
> m8xx_setup.c:92: Boot arguments: root=/dev/ram
> initrd memory block starts: c026cb2e ends c0285258
> time_init: decrementer frequency = 180000000/60
> Calibrating delay loop... 47.82 BogoMIPS
> Memory: 15028k available (748k kernel code, 464k data, 40k init)
> [c0000000,c1000
> 000]
> Dentry hash table entries: 2048 (order 2, 16k)
> Buffer cache hash table entries: 16384 (order 4, 64k)
> Page cache hash table entries: 4096 (order 2, 16k)
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> TCP: Hash tables configured (ehash 16384 bhash 16384)
> Initializing RT netlink socket
> Starting kswapd v 1.5
> CPM UART driver version 0.03
> ttyS00 at 0x0280 is a SMC
> ttyS01 at 0x0380 is a SMC
> ttyS02 at 0x0100 is a SCC
> ttyS03 at 0x0200 is a SCC
> pty: 256 Unix98 ptys configured
> RAM disk driver initialized:  16 RAM disks of 4096K size
> loop: registered device at major 7
> eth0: CPM ENET Version 0.2, 00:10:ec:00:1a:0f
> CONFIG_RPXCLASSIC
> The FEC Ethernet specific entries in the device structure...
> eth1: FEC ENET Version 0.2, 00:10:ec:80:1a:0f
> fec: Phy @ 0x0, type LXT971 (0x001378e2)
> fec: link up, 100 Mbps, full-duplex, auto complete
> PPP: version 2.3.7 (demand dialling)
> TCP compression code copyright 1989 Regents of the University of
California
> PPP line discipline registered.
> Sending BOOTP requests.... OK
> IP-Config: Got BOOTP answer from 10.20.20.10, my address is 10.20.20.11
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (romfs filesystem).
> Freeing unused kernel memory: 40k int
> Kernel panic: No init found.  Try passing init= option to kernel.
> Rebooting in 180 seconds..
>
> Any help will be high appreciated.
>
> Haifei
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/