menuconfig for PPC860T

[Tom Rini]

On Tue, Jan 09, 2001 at 01:18:44PM -0500, Dan Malek wrote:
> Brian Ford wrote:
>
> > For about the last week, make xconfig has stopped working for the
> > EST8260 board in the 2.5 bk tree.  It dies with:
> >
> > make[1]: Entering directory `/home/ford/linux/src/linuxppc_2_5/scripts'
> > cat header.tk >> ./kconfig.tk
> > ./tkparse < ../arch/ppc/config.in >> kconfig.tk
> > statement not in menu
> > make[1]: *** [kconfig.tk] Error 1
>
> Aside from this, I don't think anything but the manual 'make config' has
> ever worked for the 8260.  The problem is I set two processor type
> configuration variables, CONFIG_6xx and CONFIG_8260.  Most of the
> scripts try to be "smart" and only allow one to be set.  I know
> 'make menuconfig' doesn't work properly, I suspect 'make xconfig'
> does the same (unless Tom has fixed this recently :-).

I actually fixed menuconfig recently, in the 2_5 bk tree.  I'll try xconfig
tomorrow and attempt to fix it.

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/